SYD-3536-1 Automatic Cleveland Open Cup Flash Point Tester

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 year
• Model NO.: SYD-3536-1
• Display: LCD display
• Igniting mode: Electric ignition
• Range: RT~400ºC
• Accuracy: 0.1 ºC
• Repeatability: ≤8ºC
• Control: Semi- automatic
• Temperature sensor: RTD, Pt100
• Power supply: AC 220 V±10%, 50 Hz
• power consumption: 650W
• Transport Package: By Carton or By wooden case
• Specification: 520mm*380mm*310mm
• Trademark: SHANGYI
• Origin: CHINA
• HS Code: 9021809090
• Production Capacity: 1000 sets/Month

Product Description

Product Introduction

This instrument is designed and made as per GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland open cup method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. It is applicable to all petroleum products with flash points above 79ºC and below 400ºC.

Main technical specifications

1	Model No	SYD-3536-1
2	Product Name	Cleveland Open Cup Flash Point Tester
3	Heating device	Electric furnace heating, no naked fire, explosion prevented.The power is adjustable from 0W to 500W.
4	Temperature control	Single chip microcomputer.The heating rate can meet requirements of standards GB/T 3536-2008 and ASTM D92.
5	Temperature display	LCD shows temperature parameters. The display range is 0ºC~400ºC, display accuracy is 0.1ºC.
6	Flash point detecting device	It applies the test flame automatically.
7	Ambient temperature	(15~35)ºC
8	Igniting device	(1) Ignition source: coal gas (or civil gas) (2) Flame diameter is 3.2mm~4.8mm
9	Power supply	AC(220±10%)V, 50Hz.
10	Dimension	380mm×320mm×350mm

Full set and technical documents

No.	Item	Unit	Qty	Remarks
1	Main unit	Set	1
2	Oil cup	Piece	1
3	Igniting gun	Piece	1
4	Latex pipeφ3  0.25m	Piece	1
5	Outfiring cap	Piece	1

(1) Operation Manual                          1 piece
(2) Quality Certificate                          1 piece
(3)Repair Guarantee                           1 piece

Packing&Delivery

Company Profile

 

Shanghai Changji Geological Instrument Co.,Ltd is established in 1998,the former is Shanghai Geological Instrument Factory under the Ministry of  the National Geology and Mineral Resource.

 Changji has four major series and more than 200 types products: more 140 types petroleum instruments,more 60 types highway instruments,each 10 types for laboratory instruments,Rotary viscosity instruments and geological instruments.Also we develop and produce more than 30 kinds of non-standard instruments according to the clients' special requirements each year.It depends on the complete category products,strong matching capacity and fast development ability,its products are not only widely used in China,but also sold and welcomed in 20 countries.

 

Shanghai Changji launches advanced products domestic and overseas with innovative concept continuously replying on 50 years' R&D experience in professional instruments. Among them, the automatic flash point tester, automatic viscometer, automatic moisture tester, automatic fluorescence sulfur analyzer, etc. have reached international leading level in technology. Won a wide range of trust and praise in the domestic and foreign customers. The sales value always be the first in domestic industry.
The petroleum instruments  manufactured by our company relate to fuel oil, lubricating grease and more than 10 series and 100 types. They correspond  with standards of  ISO, ASTM, IP, GB, SH. Widely used to determine the viscosity, water content, distillation, carbon residue, cloud point, solidifying point, foaming, emulsification, flash point, corrosion, existent gum, calorific value of lubricating oil, fuel oil, solvent oil, transformer oil, steam turbine oil and crude oil. These instruments are the requisite metrology testing instruments for public institution and labs to monitor and control the quality of petroleum products.
 

 

FAQ

1. Are your products competitive?
Sure, we are leading manufacturers in China with more than 30 years' experience and professional team, we can guarantee high quality, provide training and good after-sales service.

2. How can I choose the right one for me?
You can contact us by email, online or other ways with detailed requirements, we will recommend right one accordingly.
3. What if I have difficulty in using the instrument?
Pls contact us any time when you have difficulty in using the instruments, we will provide equipment operation manual, operation video and so on. We can also provide training acoordingly.
4. When can I receive the goods?
Ordinary non customized models will be delivered within 7 working days. The transportation time is determined by the logistics company, and the general transportation time is 5-7 days.
5. How to deliver?
For domestic customers, we usually provide door-to-door service. For customers overseas, we usually deliver the instruments to the designated  places.
6. How about the packing ?
Wooden cases or hard boxes are used to prevent possible damage during transportation of the instruments.
7.How about the warranty?
Usually warranty is 12 months.

Certificates

Similar Recommedation